I finished painting my laser cut platforms over the
bank holiday weekend. As with my bridge
the plastic was first primed with two coats of Halfords grey plastic primer.
The platform has then been painted using Winton and Newton oil paints.
To begin the oil paints were thinned down with white spirit which was applied to the surface as a wash by stippling the surface using a make-up sponge. After the wash had dried additional colours
were dry brushed on.
 |
| Completed platforms with paint colours used |
 |
| Overview of platforms on layout |
 |
| Close up of platform 1 |
 |
| Close up of platforms 1, 2 and 3 |
No comments:
Post a Comment